Configure Port Forwarding - Digi IX10 User Manual

Firewall

Configure port forwarding

Required configuration items
The network interface for the rule.
n
Network connections will only be forwarded if their destination address matches the IP
address of the selected network interface.
The public-facing port number that network connections must use for their traffic to be
n
forwarded.
The IP address of the server to which traffic should be forwarded.
n
The port on the server to which traffic should be forwarded.
n
Additional configuration items
A label for the port forwarding rule.
n
The IP version (either IPv4 or IPv6) that incoming network connections must match.
n
The protocols that incoming network connections must match.
n
A white list of devices, based on either IP address or firewall zone, that are authorized to
n
leverage this forwarding rule.
To configure a port forwarding rule:

WebUI
1. Log into the IX10 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Port forwarding.
4. For Add port forward, click .
The port forwarding rule configuration window is displayed.
IX10 User Guide
Port forwarding rules
435