Show Openvpn Server Status And Statistics - Digi IX10 User Manual

Virtual Private Networks (VPN)

Show OpenVPN server status and statistics

You can view status and statistics for OpenVPN servers from either the web interface or the
command line:

WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, select Status > OpenVPN > Servers.
The OpenVPN Servers page appears.
3. To view configuration details about an OpenVPN server, click the  (configuration) icon in the
upper right of the OpenVPN server's status pane.

Command line
1. Log into the IX10 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN servers, type the following at the prompt:
> show openvpn server all
Server
---------------
OpenVPN_server1
OpenVPN_server2
>
3. To display details about a specific server:
> show openvpn server name OpenVPN_server1
Server
Enable
Type
Zone
Address
Port
Use File
Metric
Protocol
First IP
Last IP
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX10 User Guide
Enable Type Zone
------ ---- --------
true tun internal
false tun internal
: OpenVPN_server1
: true
: tun
: internal
: 192.168.30.1/24
: 1194
: true
: 0
: udp
: 80
: 99
Address Port
--------------- ----
192.168.30.1/24 1194
192.168.40.1/24 1194
OpenVPN
228