Show Openvpn Client Status And Statistics - Digi IX10 User Manual

Virtual Private Networks (VPN)

Show OpenVPN client status and statistics

You can view status and statistics for OpenVPN clients from either web interface or the command line:

WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, select Status > OpenVPN > Clients.
The OpenVPN Clients page appears.
3. To view configuration details about an OpenVPN client, click the  (configuration) icon in the
upper right of the OpenVPN client's status pane.

Command line
1. Log into the IX10 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN clients, type the following at the prompt:
> show openvpn client all
Client
---------------
OpenVPN_Client1
OpenVPN_Client2
>
3. To display details about a specific server:
> show openvpn client name OpenVPN_client1
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX10 User Guide
Enable Status Username
------ ------- --------
true connected
true pending
Use File Zone
-------- --------
true internal
true internal
OpenVPN
229