Show System; Show Network; Device Configuration Using The Command Line Interface - Digi IX10 User Manual

Command line interface
network interface lan zone "external"
network interface modem modem apn 0 apn "00000.000"
network interface modem modem apn_lock "true"
schema version "445"
>

show system

The show system
usage.
> show system
Model
Serial Number
SKU
Hostname
MAC
Hardware Version
Firmware Version
Alt. Firmware Version
Bootloader Version
Current Time
CPU
Uptime
Temperature
>

show network

The show network
> show network
Interface
----------------
defaultip
defaultlinklocal
lan
lan
loopback
wan
wan
>

Device configuration using the command line interface

The config command allows for device configuration from the command line. All configuration tasks
that can be performed by using the WebUI can also be performed by using the config command.
There are two ways to invoke the config command from the CLI:
IX10 User Guide
command displays system information and statistics for the device, including CPU
: Digi IX10
: IX10-000065
: IX10
: IX10
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 20.11.32.138
: 20.11.32.138
: 19.7.23.0-15f936e0ed
: Wed, 2 Dec 2020 8:44:23 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
: 40C
command displays status and statistics for network interfaces.
Proto Status
----- -------
IPv4 up
IPv4 up
IPv4 up 192.168.2.1
IPv6 up 0:0:0:0:0:ffff:c0a8:301
IPv4 up
IPv4 up 192.168.3.1/24
IPv6 up fd00:2704::240:ffff:fe80:120/64
Device configuration using the command line interface
Address
-------------------------------
192.168.210.1/24
169.254.100.100/16
127.0.0.1/8
573