Analyze Network Traffic - Digi IX10 User Manual

Diagnostics

Analyze network traffic

The IX10 device includes a network analyzer tool that captures data traffic on any interface and
decodes the captured data traffic for diagnostics. You can capture data traffic on multiple interfaces
at the same time and define capture filters to reduce the captured data. You can capture up to 10 MB
of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See
This section contains the following topics:
Configure packet capture for the network analyzer
Example filters for capturing data traffic
Capture packets from the command line
Stop capturing packets
Show captured traffic data
Save captured data traffic to a file
Download captured data to your PC
Clear captured data
IX10 User Guide
Save captured data traffic to a
Analyze network traffic
file.
544
548
549
549
550
552
552
554
543