Command line interface
>
Display help for individual commands
When included with a command name, both ? and help provide further information about the
command. For example:
1. To display further information about the show command, type either show ? or show help:
> show ?
Commands
--------------------------------------------------------------------------
arp
cloud
config
dhcp-lease
event
ipsec
log
manufacture
modem
network
openvpn
route
serial
system
version
> show
Use the Tab key or the space bar to display abbreviated help
When executed from the root command prompt, pressing the Tab key or the space bar displays an
abbreviated list of available commands:
Similar behavior is available with any command name:
> config network interface <space>
..
loopback
> config network interface
Auto-complete commands and parameters
When entering a command and parameter, press the Tab key to cause the command line interface to
auto-complete as much of the command and parameter as possible. Typing the space bar has similar
behavior. If multiple commands are available that will match the entered text, auto-complete is not
performed and the available commands are displayed instead.
Auto-complete applies to these command elements only :
IX10 User Guide
Show ARP tables
Show drm statistics
Show config deltas.
Show DHCP leases.
Show event list
Show IPsec statistics.
Show syslog.
Show manufacturer information.
Show modem statistics.
Show network interface statistics.
Show OpenVPN statistics.
Show IP routing information.
Show serial statistics.
Show system statistics.
Show firmware version.
...
defaultip
Auto-complete commands and parameters
defaultlinklocal lan
568