Digi IX10 User Manual page 473

System administration
Clears all configuration settings. When the device restarts, it uses the default configuration.
n
Deletes all user files including Python scripts.
n
Erases all automatically generated keys.
n
Clears event and system log files.
n
You can reset the device in the WebUI, at the command line, or by using the Reset button on the
device. You can also reset the device to the default configuration without removing scripts, keys, and
logfiles by using the revert command.

WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
3. In the Erase configuration section, click ERASE.
4. Click CONFIRM.
5. After resetting the device:
a. Connect to the IX10 by using the serial port or by using an Ethernet cable to connect the
IX10 ETH port to your PC.
b. Log into the IX10:
User name: Use the default user name: admin.
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
When you first log into the WebUI or the command line, you must change the password for
the admin user. See
IX10 User Guide
Change the default password for the admin user
Reset the device to factory defaults
for instructions.
473