Digi IX10 User Manual page 350

Applications
iv. Click  to add a custom script.
v. For Label, type Show system application.
vi. For Run mode, select On boot.
vii. For Exit action, select Restart script.
viii. For Commands, type python /etc/config/scripts/showsystem.py.
ix. Click Apply to save the configuration and apply the change.

Command line
i. Log into the IX10 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
ii. At the command line, type config to enter configuration mode:
> config
(config)>
iii. Add an application entry:
(config)> add system schedule script end
(config system schedule script 0)>
IX10 User Guide
Digidevice module
350