Digi IX10 User Manual page 116

Serial port
v. (Optional) Enable mDNS. mDNS is a protocol that resolves host names in small
networks that do not have a DNS server.
(config serial USB_port)> service tcp mdns enable true
(config serial USB_port)>
h. Configure telnet access to this port:
IX10 User Guide
(config serial USB_port)> add service tcp acl interface end
value
(config serial USB_port)>
Where value is an interface defined on your device.
Display a list of available interfaces:
Use ... network interface ? to display interface information:
Repeat this step to list additional interfaces.
To limit access based on firewall zones:
n
(config serial USB_port)> add service tcp acl zone end value
Where value is a firewall zone defined on your device, or the any keyword.
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config serial USB_port)> ... firewall zone ?
Zones: A list of groups of network interfaces that
can be referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------
-----------------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config serial USB_port)>
Repeat this step to list additional firewall zones.
CAUTION! This connection is not authenticated or encrypted.
Configure the serial port
116