Loading Media; Media Width; Pressure Roller Positioning - MUTOH kona Series User Manual

3.7

Loading media

3.7.1

Media width

According to the size of your cutter, following media width can be cut.
Type
Kona 760
Kona 1400
Kona apparel 1400
Kona 1650
Kona apparel 1650
3.7.2

Pressure roller positioning

As you notice, there are 2 pressure rollers on a Kona 760 and 3 pressure rollers on a Kona /
Kona apparel1400 or on a Kona / Kona apparel1650.
Positioning the pressure rollers on a Kona 760 is fairly easy. But on a Kona / Kona apparel
1400 or Kona / Kona apparel 1650 there are more possibilities.
This chapter explains the different possibilities.
In the picture below you find a schematic overview of the cutter. You can divide the picture in
different blocks. Please keep below picture in mind to know which item we discuss.
Schematic overview Kona / Kona apparel 1650
13 12
different pressure roller positions
Note
The most important factor is that there is always 1 pressure roller in the middle

of the grit shaft (position 6 - 7 or 8 depending on the machine).
AP-75370 - Revision 1.1
Cutting range
Min. 104 mm
Max 760 mm
Min. 104 mm
Max 1400 mm
Min. 104 mm
Max 1365 mm (smaller due to extra tool mounting assy)
Min. 104 mm
Max. 1650 mm
Min. 104 mm
Max. 1615 mm (smaller due to extra tool mounting assy)
Pressure rolller 3
11 10 9 8 7
User's Guide Kona / Kona apparel cutting plotter
Pressure rolller 2
6 5 4 3 2
Sensor 2
Basics
Pressure rolller 1
1
Sensor 1
Media
51
3