Cut Through Depth - MUTOH kona Series User Manual

3.5.2

Cut through depth

Make sure that the knife blade sticks out enough of the knife holder, but not too much. The
knife top should come through the backing.
Note
Be aware that a lower force is necessary when working with the Kona apparel

in combination with marking paper.
N°
Knife holder
1
Vinyl (On a Kona) / marking paper (On a Kona apparel)
2
Adhesive film (Not applicable when working with marking paper)
3
Backing (Not applicable when working with marking paper)
4
AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
1
1
Description
Basics
1
2
3
4
3
47