Actions 1/2; Jogging - MUTOH kona Series User Manual

User's Guide Kona / Kona apparel cutting plotter
Operation panel
4.2.4

Actions 1/2

Jogging

Used to move the head or media forward and backward. This does not change the origin.
Step 1:
Step 2:
Note
It is possible to move both the head as media at the same time when touching

the jog screen in diagonal direction.
Step 3:
120
Press the following buttons in order:
Actions

Jogging

The cutter displays following screen:
Item Information
Move the head to the left
Move the head to the right
Feed the media forwards
Feed the media backwards
Position of the knife top.
The X coordinate is the difference between the front edge of the

media and the front sensor.
The Y coordinate is measured from the right side of the cutter.

Pressing
and media returning to its previous position.
Pressing
of the position.
Navigate the head over the media using the arrows. The single arrows let the head
move slowly and more accurate. The double arrows will move the head faster.
after moving the head or the media results in the head
Cancel
after moving the head or the media results in a confirmation
OK
AP-75370 - Revision 1.1