MUTOH kona Series User Manual page 61

Note
When working on a Kona / Kona apparel 1400 or 1650 with sensitive media files

where it is not wanted to leave any pressure roller marks, it is possible to
disable the middle pressure roller (on a Kona) or to change the pressure of all
pressure rollers (on a Kona apparel).
Kona


Kona apparel


Be aware that the cutter may have less tracking when doing this.

AP-75370 - Revision 1.1
Move the middle pressure roller to the docking station. The pressure roller will
be disabled as soon as you lower them.
Move the lever upwards or downwards to adjust the pressure.
User's Guide Kona / Kona apparel cutting plotter
Basics
3
61