Cut Through - Trim Poster - MUTOH kona Series User Manual

User's Guide Kona / Kona apparel cutting plotter
Operation panel
Note
It is possible to move both the head as media at the same time when touching

the jog screen in diagonal direction.
Step 3:

Cut Through - Trim Poster

After printing posters, it is possible to use the Kona / Kona apparel to trim the posters. Do this
as follows:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
122
Navigate the head and/or media using the arrows until you reached the desired
origin.
Load the poster in the cutter.
Install a knife at through cut depth or select the correct tool in the tool manager.
Refer to
Cut through depth on page 47
Refer to
Tool on page 83
Make your personal settings regarding the cut through feature.
Tool

Velocity

Force

Tool up distance

Tool down distance

Refer to
Cut through on page 108
parameters.
Press the following buttons in order:
Actions

Cut Through

Trim poster

Set the approximate length and width of the poster.
Press play.
for all details on how to change the
AP-75370 - Revision 1.1