MUTOH kona Series User Manual page 94

User's Guide Kona / Kona apparel cutting plotter
Operation panel
Step 3:
Icon Icon name
Number
Name
Type
Velocity
Force
Offset
Location
Note
94
The settings window opens. you are now able to change the tool settings.
Description
Set / Change the number of the selected tool.
In case a number is chosen which is already taken, the Kona suggests a new

number
Change the name of the selected tool
Save the new name and return to the previous window
Cancel and return to the previous window without changing anything
Shift button, used for capital characters
Back button. Delete the last character of the name
Character set button. When pressing this button, you will switch
between:
Small characters - Large characters

Numbers

Language depended small characters - Large characters

Language depended signs

Switch between a Qwerty and an Azerty keyboard
Reset any changes done in the window back to the previous name.
Clear button. Clear the name string on the keyboard.
Decide if the selected tool is a knife or a pen
Set the velocity of the selected tool
Set the tool force of the selected tool.
This is the amount of downward pressure that the cutter applies on the knife /
pen.
Set the tool offset of the selected tool. In case the selected tool is a pen, the
Offset button is disabled.
For Kona apparel only!!
Position 1 is the standard location on the head base, position 2 is the additional
location mounted on the right side plate of the machine.
AP-75370 - Revision 1.1