Language; Diagnostics - MUTOH kona Series User Manual

User's Guide Kona / Kona apparel cutting plotter
Operation panel

Language

Sets the desired language.
Step 1:
Step 2:

Diagnostics

This section is intended for service technicians only!
Note
In case of entering the diagnostics mode and changing settings, the cutter may

become disordered if you are not sure what you are doing.
It is advised to make a backup of all parameters. Refer to the CutServer User's

Guide for more information on this topic.
116
Press the following buttons in order:
Settings

2x next page

Language

Choose your preferred languages and confirm with
AP-75370 - Revision 1.1