MUTOH kona Series User Manual page 134

User's Guide Kona / Kona apparel cutting plotter
Operation panel
Step 2:
Step 3:
If no media is loaded
Via this menu it is also possible to trim the front of the media while you are loading it. For
example, you have manually cut a piece of media. This means that the edge of the media will
not be completely straight. To trim the front side of the media, proceed as follows:
Step 1:
Step 2:
134
Depending on the settings made in the sheet-off parameter menu, one of the
following screens is displayed.
Refer to
Sheetoff on page 107
The cutter automatically performs a

sheet off operation.
No sheet off operations are being

performed.
Press Yes to proceed the sheet-off routine.
Raise the pressure rollers and insert the piece of media.
Make sure the media is laying as straight as possible, do not mind the front side.

Press the following buttons in order:
Actions

Sheet off

The cutter feeds the media forward

so you can cut it off with a knife.
AP-75370 - Revision 1.1