MUTOH kona Series User Manual page 96

User's Guide Kona / Kona apparel cutting plotter
Operation panel
Creating a new tool
In case you want to add a new tool to the management library, proceed as follows:
Step 1:
Note
In case the maximum number of tools is reached, following message is

displayed:
Deleting a tool
In case you want to delete a tool from the management library, proceed as follows:
Step 1:
Step 2:
Note
A tool can't be deleted, if:

96
Press the New tool button.
A new tool is added to the library. To adjust the tool settings, refer to

the tool settings: on page 93
Click on the tool to select the tool you want to delete.
Press the Delete tool button.
A confirmation window is shown. Click Yes if you want to delete the tool.

The tool is deleted from the list.

it is a standard tool

it is no standard tool, but is locked for deletion by the user

the tool is loaded

the tool is used as cut through tool

Changing
AP-75370 - Revision 1.1