MUTOH kona Series User Manual page 130

User's Guide Kona / Kona apparel cutting plotter
Operation panel
BC Read
BC Read allows you to read out the bar code (if present) of the file you would like to cut.
Step 1:
130
Press the following buttons in order:
Actions

Contour Cut

BC read

The Kona / Kona apparel shows following message

Position the laser at the left side of the bar code and press OK.

The Kona / Kona apparel will scan the bar code and display one of these

two messages.
Not mirrored means the cut job is inserted normally.

The bar code looks as follows:
AP-75370 - Revision 1.1