Room Conditions - MUTOH kona Series User Manual

2.2.3

Room conditions

Please protect your cutter from moisture, dust, draught and direct sunlight (to prevent

possible media detection and epos readout issues). It is best to keep your machine away
from open windows and air-conditioners.
See to it that there is an adequate space around the cutter so that ventilation is not

obstructed.
Avoid unnecessary vibrations and set up your cutter on a level surface.

Be sure to have some free space on each side of the Kona / Kona apparel to ease the

operating of it.
a = at least 1 meter

b = at least 1 meter

c = at least 1 meter

d = at least 0,2 meter

AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
d
c
Product overview
b
a
2
19