MUTOH kona Series User Manual page 95

Icon Icon name
Mechanical restriction of the machine cause that a dragknife can not be used on the

second location.
Be aware never to load a tool directly into the the additional holder on the head.

The lock prevents the tool of being deleted in the Management window. The
Lock
settings of the tool can still be changed
Resets the tool type settings (velocity, force, offset, ...) to the default settings of
Defaults
the selected tool according to it's type.
Duplicating a tool
In case you have a tool that is slightly similar to an existing tool in the library, you can
duplicate this tool.
To do so, proceed as follows:
Click on the tool to select the tool of which you want to change the settings.
Step 1:
Press the duplicate button.
Step 2:
The tool is now duplicated. In case you want to change some settings of this tool, refer to
Changing the tool settings: on page 93
Note
In case the maximum number of tools is reached, following message is

displayed:
AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
Description
Operation panel
4
95