Loading A Roll Of Pre-Printed Media Using The Roll-Off System; Configuration To Start From - MUTOH kona Series User Manual

User's Guide Kona / Kona apparel cutting plotter
Basics
3.7.5

Loading a roll of pre-printed media using the roll-off system

Note
The media roll-off system provides extra protection of your files. When only

working with the media support rollers, the media is in constant contact with
these rollers which could damage sensitive media files.
Be aware that the media roll-off system is not standard on a Kona / Kona

apparel 760, 1400 and 1650. This procedure is only possible when you have
this option installed.

Configuration to start from

The pressure rollers are raised.

The roll-off system is installed correctly:

Install deflection roll bracket.
1.
Install the deflection roll.
2.
Install the media holders.
3.
The rear media collection bag is open and empty.

The front media collection bag is open (when the cutting job is smaller than 4m).

The front media collection bag closed (when the cutting job is larger than 4m).

64 AP-75370 - Revision 1.1