Part Names And Functions - MUTOH kona Series User Manual

User's Guide Kona / Kona apparel cutting plotter
Product overview
2.3

Part names and functions

N°
1
2
3
4
5
6
7
8
9
10
11
12
13
20
Description
Pressure rollers
Media guide
Cutting mat
Grit rollers
Control panel touch screen
Cutting head
USB inlet
Power inlet and power switch To connect the power cable and power on the unit
Roll conveyor
Stand and wheels
Media bag
Roll-off system
Pressure roller lever
Extended description
To push the media against the grit rollers
A guiding platform with vacuum fans to transport
the media as flat as possible during cutting
Provides a reliable cutting surface and minimizes
damage to the knife tip
Rollers with a granular surface to move the media
front and backwards
To make various settings before and during cutting
Assembly of cutting knife, sheet-off knife and EPOS
sensor.
On the Kona apparel an extra tool mounting
position is fixed against the right inner side of the
cutter.
To connect the USB cable
To support and roll-off the media
(Optional on Kona 760)
To move the cutter easily
(Optional on Kona 760)
To collect the media when sheeting off
(Optional on Kona 760)
To roll-off pre printed media
(Optional on Kona 760)
To lower and raise the pressure rollers
AP-75370 - Revision 1.1