3.3
Installing firmware
3.3.1
Normal procedure
Make a connection between the Kona / Kona apparel cutting plotter and your
Step 1:
computer using a USB cable (standard in-the-box item).
Be sure that the USB driver is already installed!
Step 2:
Refer to
Power ON the cutter and computer.
Step 3:
Be sure that the pressure rollers are raised.
Step 4:
Download the latest firmware from
Step 5:
the Kona / Kona apparel cutting plotter installation CD.
Double click on the exe file.
Step 6:
Press next.
Step 7:
Read the License Agreement and select I accept the agreement and press next.
Step 8:
AP-75370 - Revision 1.1
Uninstall/update USB drivers on page 31
User's Guide Kona / Kona apparel cutting plotter
> window drivers or insert
Mutoh's member Site
Basics
3
33