Pressure Roller Positioning Warning - MUTOH kona Series User Manual

User's Guide Kona / Kona apparel cutting plotter
Troubleshooting

Pressure roller positioning warning

If a pressure roller is wrongly positioned, the Kona will show a warning message during the media measurement. There are 3 types of warning
messages.
Move pressure roller. (Can appear on Kona 760 - 1400 - 1650)

In case the pressure roller is not positioned correctly, a warning message appears. Move the requested grit roller to the requested position.

Refer to
Pressure roller positioning on page 51
183
for more information.
AP-75370 - Revision 1.1