MUTOH kona Series User Manual page 200

User's Guide Kona / Kona apparel cutting plotter
Troubleshooting
Error Message Description
Stretch detected on bottom of frame. P1 & P4 have identical thickness. P2 & P3
Print distortion
6227 have identical thickness. But thickness of P1-P4 and P2-P3 differ too much from
print stretch
each other. Print is stretched.
Stretch detected on top of frame. P5 & P8 have identical thickness. P6 & P7 have
Print distortion
6228 identical thickness. But thickness of P5-P8 and P6-P7 differ too much from each
print stretch
other. Frame (print result) is stretched.
Stretch detected on side of frame. Px & Py have identical thickness. Pw & Pz have
identical thickness. But thickness of Px-Py and Pw-Pz differ too much from each
other. Frame (print result) is stretched! Depending on kind of measured segment:
Px, Py, Pw, Pz are different.
Print distortion
6229
Px = P1, Py = P4, Pw = P5, Pz = P8
1.
print stretch
Px = P1, Py = P4, Pw = P9, Pz = P10
2.
Px = P9, Py = P10, Pw = P11, Pz = P12
3.
Px = P11, Py = P12, Pw = P5, Pz = P8
4.
200
Solution
You can try to cut the job if you want
to. Perfect quality is not guaranteed.
What to check in case of bad quality:
Printer settings

RIP settings

Design

Refer to
Bounding box details on
page 152
AP-75370 - Revision 1.1
Category
Warning