MUTOH kona Series User Manual page 204

User's Guide Kona / Kona apparel cutting plotter
Troubleshooting
Error Message Description
No valid frame No valid frame found during fast scan routine (after several retries). Make sure all
6261
found frame specifications are applied.
No valid frame
6262 Only 1 frame point found during diagonal scan.
found
No valid frame
6263 No frame points found during diagonal scan.
found
No valid frame
6264 Thickness of left side of frame invalid
found
No valid frame
6265 Varying thickness
found
No valid frame
6266 Invalid thickness
found
No valid frame
6267 Invalid frame angle
found
No valid frame
6268 Requested X movement for fast scan cannot be executed.
found
No valid frame
6269 Invalid spot type
found
204
Solution
To check:
Frame isn't found within 120 cm.

Media space before frame bottom
is too much.
Frame bottom doesn't have the

correct specifications (minimum
thickness of 3mm on ALL sides,
thickness too varying, frame
height < 20cm, frame width <
10cm, frame angle < 5°)
Refer to
Bounding box details on
page 152
AP-75370 - Revision 1.1
Category
Error