MUTOH kona Series User Manual page 92

User's Guide Kona / Kona apparel cutting plotter
Operation panel
The Tool management window opens:
Tool management window
Note
For Kona apparel only: Tool 1, 2 and 3 are default tools in the firmware and can

not be deleted. These tools will always be locked.



92
Tool 1is configured as a knife, positioned in location 1, used to cut.
Tool 2 is configured as a knife, positioned in location 1, used for cut through
operations.
Tool 3 is configured as a pen, positioned in location 2.
Icon Icon information
Indicates that this tool is the loaded tool for the
location.
Indicates the type of tool. In this case a drag
knife.
Indicates that the tool is locked and can't be
deleted. The settings however can still be
changed.
For Kona apparel only: Indicates the tool position.
Position 1 is the standard location on the head
base, position 2 is the additional location
mounted on the right side plate of the machine.
For Kona apparel only: Indicates where the tool is
parked.
Note:
Be aware never to load a tool directly into

the the additional holder on the head.
To change the settings of the tool.
Refer to
Changing the tool settings: on
page 93
Duplicate a tool in the tool list. The settings of the
selected tool are copied in a new tool.
Refer to
Duplicating a tool on page 95
Make a new tool with the default settings
Refer to
Creating a new tool on page 96
Delete a selected tool.
Refer to
Deleting a tool on page 96
Used to scroll through the tool list
Used to scroll through the tool list
Opens a help screen
Close the help screen by a random click in the
screen.
Refer to
Tool management help on page 93
AP-75370 - Revision 1.1