MUTOH kona Series User Manual page 71

Choose the appropriate media measure method:
Step 4:


Refer to
Load the media straight. To help you, rulers are drilled in the front platen.
Step 5:
Verify the media is cut off straight at the front to avoid media initialization
Step 6:
mismatches.
Rise the lever.
Step 7:
Note
Make sure not to get stuck on the pressure roller lever, this could damage your

clothes.
Note
The head will move fast over the media. Be careful not to pinch your fingers

during this action.
The cutter will measure the paper and displays a message:
Step 8:
AP-75370 - Revision 1.1
With front Uneven media
Without front Uneven Media
Load mode on page 104
User's Guide Kona / Kona apparel cutting plotter
Basics
3
Indicates the max
working width when
working with a
Kona Apparel
71