MUTOH kona Series User Manual page 70

User's Guide Kona / Kona apparel cutting plotter
Basics
Note
When working on a Kona / Kona apparel 1400 or 1650 with sensitive media files

where it is not wanted to leave any pressure roller marks, it is possible to
disable the middle pressure roller (on a Kona) or to change the pressure of all
pressure rollers (on a Kona apparel).
Kona

Kona apparel

Be aware that the cutter may have less tracking when doing this.

70
Move the middle pressure roller to the docking station. The pressure roller will

be disabled as soon as you lower them.
Move the lever upwards or downwards to adjust the pressure.

AP-75370 - Revision 1.1