MUTOH kona Series User Manual page 184

User's Guide Kona / Kona apparel cutting plotter
Troubleshooting
No pressure rollers on centre grit roller

There must always be 1 pressure roller on the centre grit roller. Position one of the suggested pressure rollers on the centre grit roller.

Refer to
Pressure roller positioning on page 51
Too many pressure rollers on centre grit roller

There are too many pressure rollers positioned in the middle of the grit roller. Reposition the pressure rollers on the grit roller.

Refer to
Pressure roller positioning on page 51
184
Kona 1400
for more information.
Kona 1400
for more information.
Kona 1650
Kona 1650
AP-75370 - Revision 1.1