3.7.4
Loading a roll of media using the media support rollers
Note
The media support rollers are not standard on a Kona 760. This procedure is
only possible when installing this option.
Configuration to start from
The pressure rollers are raised.
The media support rollers are installed correctly.
Note
Make sure to install the anti static brushes on the support system. This to
remove all static electricity.
t
The rear media collection bag is open and empty.
The front media collection bag is open (when the cutting job is smaller than 4m).
The front media collection bag closed (when the cutting job is larger than 4m).
AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
Anti static brushes
Basics
3
59