5.2
Kona / Kona apparel calibration
5.2.1
Knife settings
There are 3 factors that have to be taken into account when setting up your cutter to execute
a demanding cutting job:
The knife depth for as well kiss cutting, contour cutting as through cutting.
Refer to
know how to set and test this parameter.
The cutting pressure for as well kiss cutting, contour
cutting as through cutting
Refer to
this parameter.
The offset of the knife
Refer to
test this parameter.
AP-75370 - Revision 1.1
Setting the correct knife depth on page 46
to know how to set and test
Force on page 85
to know how to set and
Offset on page 87
User's Guide Kona / Kona apparel cutting plotter
to
Finetuning your cutter
141
5