User's Guide Kona / Kona apparel cutting plotter
Through cutting
7.1
Introduction
Working with the through cut setting consists out of two major parts.
The first part is when working with the Kona.
When the contour of your file is completed, single sticker samples (basic shapes) are often to
be isolated. (E.g. if making 100 stickers, you want to be able to get out every sticker
separately.
The second part is when working with the Kona apparel.
When you have written the text you want, or drawn the design you wanted, you are able to cut
out the design using the through cut setting.
162
AP-75370 - Revision 1.1