User's Guide Kona / Kona apparel cutting plotter
Troubleshooting
Media loaded warning
When starting up the Kona / Kona apparel it is advised there is no media loaded. If there is media loaded, the Kona / Kona apparel will show below
warning message.
If the sheet off knife is in the down position, the loaded media is sheeted off while the Kona / Kona apparel is initializing.
Media raise warning during media load
During media load, if there is a media lift at the back of the machine the following message dialogue is thrown.
The user can choose between continue or stop the media measurement. Also can he choose the use the current position as rear media border.
180
AP-75370 - Revision 1.1