Un)Install Usb Drivers; Install Usb Drivers - MUTOH kona Series User Manual

3.1

(Un)Install USB drivers

Before you are able to work with Mutoh's Kona / Kona apparel cutting plotter compatible
software, a connection between your workstation and the Kona / Kona apparel cutting plotter
should be made.
In case your computer already has an earlier USB driver installed, please uninstall it
and reinstall the driver.
Refer to
Uninstall/update USB drivers on page 31
3.1.1

Install USB drivers

Download the latest drivers from
Step 1:
Unpack the driver package.
Step 2:
Make a connection between the cutter and your computer using a USB cable.
Step 3:
Power ON the cutter and computer.
Step 4:
Note
When working in a Windows Vista or 7 environment, it might be possible that

the drivers are installed automatically. If the installation is not correct or is
does not run automatically, continue with his procedure.
Your computer shows an error when auto installing
Step 5:
AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
> window drivers.
Mutoh's member Site
Basics
3
23