MUTOH kona Series User Manual page 72

User's Guide Kona / Kona apparel cutting plotter
Basics
Step 9:
Note
In some cases, the cutter gives a warning screen for example if there is no tool

installed, the media is too thick...
Step 10:
Note
Cut files are clipped in case the cut file is larger than the media width.

72
When no problems occur, the main screen will appear. The home window displays
the usable width of media:
Select ignore in case you want to proceed with an undetected tool.

In case you forgot to install a tool, install the tool of your choice and select retry.

The cutter will measure the tool height and proceed as normal.
The media is now properly loaded and you are ready to cut.
AP-75370 - Revision 1.1