Actions 2/2; Copies - MUTOH kona Series User Manual

4.2.5

Actions 2/2

Copies

In case multiple outputs of a specific design are needed, use the copies function. This
function will replot the last set of data, which was sent to the cutting plotter. That is, all data
that was sent since the last INITIALISATION command ("IN").
Note
Be aware that you need to set the number of copies before starting any cut

operations.
Set the number of copies as follows:
Press the following buttons in order:
Step 1:



Set the number of copies and confirm with
Step 2:
AP-75370 - Revision 1.1
Actions
next page
Copies
User's Guide Kona / Kona apparel cutting plotter
.
Operation panel
4
137