Cleaning The Touch Screen - MUTOH kona Series User Manual

Place the base part on top of the holder assembly and twist it tightly.
Step 4:
8.1.4

Cleaning the touch screen

After a while, fingerprints or dust will make the touch screen dirty. Clean the touch screen as
follows:
Power off the cutter.
Step 1:
Wet a soft, lint-free or microfiber cloth with distilled water. Wring out as much water
Step 2:
as you can. Make sure the cloth is damp but not wet. Wipe the screen in a gentle
motion to remove dust or fingerprint smudges off.
Another option is to use a screen cleaner kit that includes antistatic wipes. You can
Step 3:
buy this at various electronic or online stores. Spray a little solution on a wipe then
rub it gently across the screen.
Finish cleaning the touch screen with a dry lint-free cloth to wipe any excess
Step 4:
moisture.
AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
Maintenance
8
175