MUTOH kona Series User Manual page 68

User's Guide Kona / Kona apparel cutting plotter
Basics
Step 8:
Step 9:
Note
In case there is no tool installed, the cutter gives a warning screen.

Step 10:
Step 11:
68
The cutter measures the media and displays a message:
When no problems occur, the main screen appears. The usable width of media is
displayed:
Select ignore in case you want to proceed without any tools.

In case you forgot to install a tool, install the tool of your choice and select retry.

The cutter will measure the tool height and proceed as normal.
The media is now properly loaded and you are ready to cut.
You are ready to cut.
AP-75370 - Revision 1.1