Recovery Procedure; Reinstalling The Fw Via The Pc - MUTOH kona Series User Manual

3.3.2

Recovery procedure

In case the cutter fails to update the firmware, there is a recovery procedure available. If the
firmware upgrade has failed, the cutter will:
not light its display

not make a sound when powering on

blink 4 error leds (available when removing the right hand cover)

There are 2 possibilities to perform a recovery.

Reinstalling the FW via the PC.

To use the recovery mode, proceed as follows:
Download the latest firmware from
Step 1:
the Kona / Kona apparel cutting plotter installation CD.
Double click on the exe file.
Step 2:
Press next.
Step 3:
Read the License Agreement and select I accept the agreement and press next.
Step 4:
AP-75370 - Revision 1.1
User's Guide Kona / Kona apparel cutting plotter
> window drivers or insert
Mutoh's member Site
Basics
3
35