Create Date Of The Contour Cut Line; Procedure Of The Cut Contour; Read In The Data Of The Adobe Illustrator - MUTOH VC-600 User Manual

FlexiSTARTER Quick Start Guide

8.9 Create Date of the Contour Cut Line

8.9.1 Procedure of the cut contour

The FlexiSTARTER ValueCut Edition allows you to read in and edit data created in the Adobe Illustrator
or the CorelDRAW. This is the procedure of the cut contour using the sample data made for the
FlexiSTARTER ValueCut Edition.
Procedure:
1. Read in the design data made in the Illustrator or others by the FlexiSTARTER ValueCut Edition.
2. Extract the contour cut line from the data red in.
3. Place the contour cut mark that is ValueCut-readable around the contour cut line extracted.
4. Print the cutting data of the contour cut from the printer connected to the computer.
5. After loading the media printed, execute the cutting job from the FlexiSTARTER.

8.9.2 Read in the data of the Adobe Illustrator

Select "Open" from the file menu in the FlexiSTARTER.
Read in the sample data: "Airborne.ai."
"Airborne.ai" is in these folders as follows:
As in the 64bit OS
C:¥Program Files (x86)¥Mutoh¥FlexiSTARTER ValueCut Edition¥Samples¥Illustrator
As in the 32bit OS
C:¥Program Files¥Mutoh¥FlexiSTARTER ValueCut Edition¥Samples¥Illustrator
82
ValueCut USER MANUAL
V5a 2015 Jan