Starting And Stopping The Http Server - ADC CUDA 3 Administration Manual

88 C 4: C
HAPTER HASSIS

Starting and Stopping the HTTP Server

C
ONFIGURATION
The chassis runs an HTTP server, which allows CudaView users to manage
the chassis with their Web browsers. Refer to the Cuda 12000 IP Access
Switch CudaView Administration Guide for more information on CudaView.
You can start and stop the HTTP server using the http-server command. If
you stop the HTTP server, the chassis cannot be managed through
CudaView. By default, the HTTP server is enabled and running.
To start and stop the HTTP server, perform these tasks:
Task
1. Enter root mode.
2. Start the HTTP server.
3. Stop the HTTP server.
Command
root
http-server enable
http-server disable
ADC Telecommunications, Inc.