Deleting Arp Entries - ADC CUDA 3 Administration Manual

Deleting ARP Entries

Cuda 12000 IP Access Switch CLI-based Administration Guide
Static entries remain in the ARP cache until you manually remove them. You
can remove any ARP entry using the following procedure.
Task
1. Enter configuration mode for the
selected Ethernet interface.
2. Remove the IP-to-MAC address
mapping by specifying the IP
address.
Example
cli:172.16.19.10:root# interface 1/11/1
mode: interface:ethernet:csi(1/11/1)
cli:172.16.19.10:interface:ethernet:csi(1/11/1)# show arp
row count: 1
IP Address MAC Address
---------------- ------------------ ----------
172.31.1.70 00:10:93:01:ef:d7
cli:172.16.19.10:interface:ethernet:csi(1/11/1)# del arp
172.31.1.70
cli:172.16.19.10:interface:ethernet:csi(1/11/1)# show arp
IP Address MAC Address
---------------- ------------------ ----------
cli:172.16.19.10:interface:ethernet:csi(1/11/1)#
Managing the Address Resolution Protocol (ARP)
Command
interface <c/s/i>
del arp <ip-address>
Type
Type
static
287