Snmp Commands - ADC CUDA 3 Administration Manual

584 A A: C
PPENDIX OMMAND

SNMP Commands

Command
snmp-server community
<community-name>
<security-name>
[address <ip-address>
[mask <ip mask>]]
[context <context>]
[storage {volatile | nonvolatile |
permanent | readonly}]
snmp-server contact <contact>
snmp-server context
<context-name> [storage {volatile |
nonvolatile | permanent | readonly}]
[status {enable | disable}]
snmp-server group <group-name>
{v1 | v2c | v3 {auth | noauth | priv}}
[read <readview-name>] [write
<writeview-name>] [notify
<notifyview-name>] [context
<context-name>] [storage {volatile |
nonvolatile | permanent | readonly}]
snmp-server host <ip-address>
<community-name> {traps | informs
[timeout <seconds>] [retries
<retries>]} [version {1 | 2c | 3 {auth |
noauth | priv}}] [udp-port <port>]
[mms <size>] [storage {volatile |
nonvolatile | permanent | readonly}]
[notification-type <type>...]
snmp-server location <location>
snmp-server name <name>
snmp-server user <user> [auth {md5
| sha} <auth-password> [priv des56
<priv-password>]] [storage {volatile |
nonvolatile | permanent | readonly}]
[status {enable | disable}]
S
UMMARY
Table A-13 SNMP Commands
Mode
root
root
root
root
root
root
root
root
Description
Creates an SNMP community.
Specifies the SNMP contact for the
network.
Creates an SNMPv3 context.
Creates an SNMP group.
Creates an SNMP host to receive
trap messages.
Specifies the physical location of
the Cuda 12000.
Specifies the system name.
Creates an SNMPv3 user for the
SNMP entity.
ADC Telecommunications, Inc.