Rx Abort; Rx Runts; Interface Type; Interface Speed - ADC CUDA 3 Administration Manual

122 C 7: P
HAPTER ACKET
O SONET A
VER DMINISTRATION
Display Element

Rx Abort

Rx Runts

Interface Type

Interface Speed

Interface in Unicast Pkts
Interface in Discards
Interface in Errors
Interface Out Unicast Pkts
Interface Out Discards
Interface Out Errors
LCP
Open
Negotiation Attempts
Retry Timeout
IPCP IP Address Report
Line Type
Clock Source
Path Signal Id - C2 byte
Packet Scrambling
Description
The number of packets received on this
link in which the abort sequence is
detected.
The number of packets received on this
link which are smaller than the minimum
packet size.
Displays "ppp" (Point-to-Point Protocol).
Transmission speed in Kbits.
Number of Unicast packets received on
this interface.
Total number of incoming packets that
were discarded by this interface.
Number of incoming packet errors seen
on this interface.
Number of Unicast packets transmitted
from this interface.
Total number of outgoing packets that
were discarded by this interface.
Number of outgoing packet errors seen
on this interface.
Indicates whether the LCP layer is open or
closed on this interface.
Indicates which network layer protocols
are open. For example IPCP would be
displayed when IP is up.
The maximum number of link negotiation
attempts allowed by this interface.
Interval to wait between link connection
retries.
Indicates whether NCP is enabled for the
transmission of IP datagrams. IP Control
Protocol (IPCP) is the network control
protocol used.
Indicates SONET line type.
Indicates the clock source configured for
this interface.
C2 byte received in last packet.
Indicates whether packet scrambling in
enabled or disabled.
ADC Telecommunications, Inc.