268
C
13: C
HAPTER
ONFIGURING
Removing DHCP Authority Ranges
cli:192.168.208.3:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:192.168.208.3:interface:cable:csi(1/1/1)# show dhcp-authority
row count: 1
Range Number
---------------- ---------------- ---------------- ------
DHCP Authority Status
cli:192.168.208.3:interface:cable:csi(1/1/1)# no dhcp-authority 1
cli:192.168.208.3:interface:cable:csi(1/1/1)# show dhcp-authority
Range Number
---------------- ---------------- ---------------- ------
DHCP Authority Status
DHCP A
UTHORITY
You can remove DHCP Authority ranges using the no dhcp-authority
command. You may want to do so if you no longer require the range, or if
you want to redefine the range. Note that you cannot modify DHCP
Authority ranges, so if you want to redefine a range, you must delete it and
then recreate it with the new configuration.
To remove a DHCP authority range from an interface, perform the following
task within interface configuration mode:
Task
1. Enter interface configuration
mode.
2. Remove a DHCP authority range
from the current interface.
Example
The following example removes DHCP authority range 1 from interface
1/1/1:
Lower Range
1 172.16.19.10
Lower Range
Command
interface <c/s/i>
no dhcp-authority <index number>
Upper Range
Status
172.16.19.20
enable
Upper Range
Status
enable
1
ADC Telecommunications, Inc.