ADC CUDA 3 Administration Manual page 580

578 A A: C
PPENDIX OMMAND
Command
cm modify cm-downstream
<group-id> {<ip-address> |
<mac-address> | <sid>}
cm modify cm-upstream <group-id>
{<ip-address> | <mac-address> |
<sid>}
cm modify cpe-downstream
<group-id> {<ip-address> |
<mac-address> | <sid>}
cm modify cpe-upstream <group-id>
{<ip-address> | <mac-address> |
<sid>}
cm modify learnable {<ip-address> |
<mac-address> | <sid>}
cm modify max-ip <number>
{<ip-address> | <mac-address> |
<sid>}
cm reset
cpe-control active
cpe-control learnable
cpe-control max-ip <number>
privacy auth <mac-address>
{cm-lifetime <number> | cm-reset
{invalidateAuth | invalidateTeks |
sendAuthInvalid}}
privacy base auth-lifetime
<0..6048000>
S
UMMARY
Mode
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
Any
Any
Any
interface:cable:csi
interface:cable:csi
Description
Assigns a downstream filter group
to a cable modem.
Assigns an upstream filter group to
a cable modem.
Assigns a downstream filter group
to CPE devices that access the
network through the specified
cable modem.
Assigns an upstream filter group to
CPE devices that access the
network through the specified
cable modem.
Enables the ability of the CMTS to
discover IP addresses of CPE
associated with the specified cable
modem.
Sets the maximum number of IP
addresses of CPE devices
associated with the specified cable
modem that can access the
network.
Resets cable modems attached to
the current cable interface.
Specifies whether the CMTS
performs subscriber management
by default for cable modems.
Specifies whether the CMTS
discovers the IP address of CPE
automatically.
Specifies the default maximum
number of CPE IP addresses that
can access the network through a
single cable modem.
Sets the lifetime in seconds that
the CMTS assigns to an
authorization key for a specified
cable modem.
Sets the lifetime in seconds that
the CMTS assigns to a new
authorization key.
ADC Telecommunications, Inc.