Cable Modem And Subscriber Administration Commands - ADC CUDA 3 Administration Manual

Cable Modem and Subscriber Administration Commands

Command
clear service-flow log <all>
cm-filter <group-number>
<filter-number> {deny | permit} prot
{any | tcp | udp | <number>} [src
<ip-address> <mask>] [dest
<ip-address> <mask>] [tos
<tos-value> <mask>] [src-port {any |
<number>}] [dest-port {any |
<number>}] [tcp-flag {ack | fin | push
| reset | syn | urgent} tcp-flag-mask
{ack | fin | push | reset | syn | urgent}]
cm-filter-default cm downstream
<group-id>
cm-filter-default cm upstream
<group-id>
cm-filter-default cpe downstream
<group-id>
cm-filter-default cpe upstream
<group-id>
cm-offline clear
cm-offline persist
cm-offline timer <number>
cm cpe-reset {<ip-address> |
<mac-address> | <sid>}
cm modify active {<ip-address> |
<mac-address> | <sid>}
Cuda 12000 IP Access Switch CLI-based Administration Guide
Cable Modem and Subscriber Administration Commands
Table A-9 Cable Modem and Subscriber Administration Commands
Mode
interface:cable:csi
Any
Any
Any
Any
Any
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
Description
Clears Service Flow logs.
Creates a packet filter for
upstream or downstream cable
modem or CPE traffic.
Specifies the default downstream
filter group for cable modems.
Specifies the default upstream
filter group for cable modems.
Specifies the default downstream
filter group for CPE devices.
Specifies the default upstream
filter group for CPE devices.
Flushes all offline modems on the
current interface from the CMTS
tables.
Enables the CMTS to maintain
statistics for a cable modem after
the modem goes offline.
Specifies the number of days that
the CMTS tracks offline cable
modems.
Clears the CPE IP addresses that
the CMTS has learned for the cable
modem.
Enables the ability of the CMTS to
perform subscriber management
of devices associated with the
specified cable modem.
577