ADC CUDA 3 Administration Manual page 168

Ip access switch cli-based administration guide
Table of Contents

Advertisement

166
C
9: S
HAPTER
IMPLE
N
M
P
ETWORK
ANAGEMENT
ROTOCOL
Perform the following tasks to configure SNMP Access Views:
Tasks
1. Enter configuration mode.
2. Create a MIB view by performing
the following tasks:
Specify the name of the view.
Specify the MIB subtree that
defines the family of views. You
can enter the MIB value as an
Object Identifier (OID), and OID
with wildcards, or an OID name
description.
Set the corresponding instances
of the MIB subtree to be
included or excluded in the MIB
view.
3. Specify the storage type for the
MIB view. By default, storage
type is set to NonVolatile.
4. Set the status of the MIB view.
You enable or disable the status.
Enable sets the status to Active.
Disable sets the status to Not in
Service. By default, the status is
set to Active.
5. Display an SNMP MIB view.
6. Remove an SNMP MIB view.
(SNMP)
Commands
root
snmp-server view <view name>
<oid-tree> {included | excluded}
snmp-server view <view name>
<oid-tree> {included | excluded}
[storage {volatile | nonvolatile |
permanent | readonly}]
snmp-server view <view name>
<oid-tree> {included | excluded}
[status {enable | disable}]
show snmp view [<view name>]
no snmp-server view <view name>
ADC Telecommunications, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CUDA 3 and is the answer not in the manual?

This manual is also suitable for:

Cuda 12000

Table of Contents

Save PDF